See our video on our high efficiency water heating elements and run video on our new LifePo 4 Bettery
DC Water Heater Element 12 Volt 65 Watt with Thermostat 140 Degrees F
ONE 7 INCH DC WATER HEATING ELEMENT 12 VOLT 65 WATT
with automatic resetting thermostat for DC water heating 140 Degree Fahrenheit
Fits standard water heaters with a 1″ NPT
First we start with solid brass base and copper
Then it gets nickel plated for long life.
USES
Livestock water tank deicer (low amp draw means you won’t drain your battery as fast)
For keeping dog, cat, and other domestic animals water from freezing
Standard American water heater element replacement
Water preheating
Campers, Motor homes
Emergency hot water
Portable commercial, industrial machines and equipment
Runs off your car battery for portable hot water anywhere
Direct wind and solar applications
Concrete mixing trucks
and many, many more uses where heat or diversion loads are needed
DC water heating elements are much safer than 110 volt
WIND TURBINE WATER HEATING
Heat water directly using a wind turbine generator (with or without a battery bank). Wind turbine generators are used primarily for electricity generation.
The power used can be stored in a battery bank or connected to the mains supply using a suitable grid tie inverter.
In very strong winds, and/or when the batteries are fully charged a wind turbine may generate more current than the batteries can handle.
Therefore a dump load is often used to divert the extra energy to heat water so it is not wasted and so that the wind turbine does not spin so quickly that it is damaged.
Diversion Load Water Heating
Pictured above is a typical 12V water heating element which can be
screwed into an immersion heater drain-cock hole.
When used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator.
When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier – USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
PaymentShippingReturns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer Fast shipping on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
ONE 7 INCH DC WATER HEATING ELEMENT 12 VOLT 65 WATT with automatic resetting thermostat for DC water heating 140 Degree Fahrenheit Fits standard water heaters with a 1″ NPT First we start with solid brass base and copper Then it gets nickel plated for long life. USES <li>Livestock water tank deicer (low amp draw means you won’t drain your battery as fast)</li><li>For keeping dog, cat, and other domestic animals water from freezing </li><li>Standard American water heater element replacement</li><li>Water preheating </li><li>Campers, Motor homes</li><li>Emergency hot water </li><li>Portable commercial, industrial machines and equipment </li><li>Runs off your car battery for portable hot water anywhere</li><li>Direct wind and solar applications </li><li>Concrete mixing trucks </li><li>and many, many more uses where heat or diversion loads are needed</li><li>DC water heating elements are much safer than 110 volt WIND TURBINE WATER HEATING Heat water directly using a wind turbine generator (with or without a battery bank). Wind turbine generators are used primarily for electricity generation. The power used can be stored in a battery bank or connected to the mains supply using a suitable grid tie inverter. In very strong winds, and/or when the batteries are fully charged a wind turbine may generate more current than the batteries can handle. Therefore a dump load is often used to divert the extra energy to heat water so it is not wasted and so that the wind turbine does not spin so quickly that it is damaged. Diversion Load Water Heating Pictured above is a typical 12V water heating element which can be screwed into an immersion heater drain-cock hole. When used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water. </li>
DC Water Heater Element 12 Volt 65 Watt with Thermostat 140 Degrees F
See our video on our high efficiency water heating elements and run video on our new LifePo 4 Bettery
ONE 7 INCH DC WATER HEATING ELEMENT 12 VOLT 65 WATT
with automatic resetting thermostat for DC water heating 140 Degree Fahrenheit
Fits standard water heaters with a 1″ NPT
First we start with solid brass base and copper
Then it gets nickel plated for long life.
USES
Livestock water tank deicer (low amp draw means you won’t drain your battery as fast)
For keeping dog, cat, and other domestic animals water from freezing
Standard American water heater element replacement
Water preheating
Campers, Motor homes
Emergency hot water
Portable commercial, industrial machines and equipment
Runs off your car battery for portable hot water anywhere
Direct wind and solar applications
Concrete mixing trucks
and many, many more uses where heat or diversion loads are needed
DC water heating elements are much safer than 110 volt
WIND TURBINE WATER HEATING
Heat water directly using a wind turbine generator (with or without a battery bank). Wind turbine generators are used primarily for electricity generation.
The power used can be stored in a battery bank or connected to the mains supply using a suitable grid tie inverter.
In very strong winds, and/or when the batteries are fully charged a wind turbine may generate more current than the batteries can handle.
Therefore a dump load is often used to divert the extra energy to heat water so it is not wasted and so that the wind turbine does not spin so quickly that it is damaged.
Diversion Load Water Heating
Pictured above is a typical 12V water heating element which can be
screwed into an immersion heater drain-cock hole.
When used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator.
When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier – USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer Fast shipping on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
ONE 7 INCH DC WATER HEATING ELEMENT 12 VOLT 65 WATT
with automatic resetting thermostat for DC water heating 140 Degree Fahrenheit
Fits standard water heaters with a 1″ NPT
First we start with solid brass base and copper
Then it gets nickel plated for long life.
USES
Livestock water tank deicer (low amp draw means you won’t drain your battery as fast)
For keeping dog, cat, and other domestic animals water from freezing
Standard American water heater element replacement
Water preheating
Campers, Motor homes
Emergency hot water
Portable commercial, industrial machines and equipment
Runs off your car battery for portable hot water anywhere
Direct wind and solar applications
Concrete mixing trucks
and many, many more uses where heat or diversion loads are needed
DC water heating elements are much safer than 110 volt
WIND TURBINE WATER HEATING
Heat water directly using a wind turbine generator (with or without a battery bank). Wind turbine generators are used primarily for electricity generation.
The power used can be stored in a battery bank or connected to the mains supply using a suitable grid tie inverter.
In very strong winds, and/or when the batteries are fully charged a wind turbine may generate more current than the batteries can handle.
Therefore a dump load is often used to divert the extra energy to heat water so it is not wasted and so that the wind turbine does not spin so quickly that it is damaged.
Diversion Load Water Heating
Pictured above is a typical 12V water heating element which can be
screwed into an immersion heater drain-cock hole.
When used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator.
When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Be the first to review “DC Water Heater Element 12 Volt 65 Watt with Thermostat 140 Degrees F”